Adhesive High-Temperature-Resistant Adhesive and Filler Material
A ready-to-use adhesive and filler with fast bonding strength, capable of withstanding temperatures above 1,200°C, used for bonding and sealing hot surfaces.
FR Adhesive contains a water-based inorganic polymer and filler and is designed to withstand temperatures above 1,200°C. It is supplied as a ready-to-use thixotropic paste with excellent and fast bonding strength.
Once cured, the product forms a cement that provides excellent adhesion with a permanent bond.
It is suitable for most surfaces, including stone, brick, concrete, cement, plaster, wood, metals, mineral wool, glass, paper, vitreous and ceramic surfaces, and all inorganic materials. Adhesion must be tested on plastic and painted surfaces.
CERTIFICATIONS:
- Ideal for bonding mineral boards to steel, wood and concrete, adding an extra layer of protection against heat transfer.
- Ideal for sealing joints in stoves, chimneys, barbecues and central-heating boilers.
- Ideal for sealing circular gaps around pipes with high surface temperatures.
- Suitable for use on chimney surfaces, concrete plants and hot areas of all production facilities.
- Ideal for sealing and repairing small cracks and holes in car exhaust systems, preventing noise and gas emission leaks. Bonds instantly without additional support, when applied correctly.
- Provides high bonding strength once cured.
- Ready to use and easy to apply.
- Sets quickly. It cures hard in air, especially when heated. Initial setting takes approximately 1 hour, good adhesion is achieved in 4 hours and full curing takes 48 hours.
- Resistant to sagging.
- Resistant to impact and vibration during service.
- No primer is required for application to most materials.
- Odourless and VOC-free.
- Alkaline; it does not attack acid-sensitive surfaces.
- Has a 12-month shelf life when stored under suitable conditions.
- Has a 30-year service life under suitable conditions.
Technical Data
| Property | Value |
|---|---|
| State | Ready-to-use paste |
| Curing Type | Hardens through water loss in air, particularly at high temperatures. |
| Density | 1.7 - 1.9 |
| Flash Point | None |
| Colour | Beige |
| Odour | Barely perceptible odour |
| Evaporation Rate | Negligible |
| Water Solubility | Soluble |
| Viscosity | Viscous |
| pH | 11.0 |
| Solid Content (% w/w) | >70% |
| Flexibility | None |
| Tack-Free Time | Approximately 60 minutes |
| Skin Formation (Film) | Approximately 10 minutes |
| Full Cure | 4 to 24 hours, depending on temperature |
| Application Temperature | +5°C to +30°C during application and curing |
| Service Temperature | -50°C to +1,200°C; prevent condensation on the product |
| Shelf Life and Storage | Up to 12 months when stored in unopened containers under cool and dry conditions. Avoid frost and extreme temperatures. |
| Service Life | Minimum 30 years when protected from contact with water and moisture |
| Packaging | Box containing 25 x 310 ml cartridges Box containing 12 x 600 ml foil sausages 10-litre buckets 310 ml pallets: 64 boxes per pallet, equivalent to 1,600 units 600 ml pallets: 91 boxes per pallet, equivalent to 1,092 units |
It can be used as both an adhesive and a sealant in many applications where very hot surfaces need to be bonded or sealed, or where a seal or bond must be maintained without separating in the event of a fire.
Fire Resistance:
Provides fire resistance up to 2 hours depending on the application.